DISCONTINUED - Kicker PXiBT502 50 Watt 2-Channel Class D Amplifier / Controller
- Add an audio system without a radio or headunit
- Two-channel 50 Watt RMS amplifier
- 15 watts RMS x 2 Channels at 4 ohms
- Bluetooth enabled remote control keypad controls the amplifier
- Back-lit buttons
- Conformal coated circuit board suitable for marine, ATV, side-by-side and motorcycles
- 3.5mm headphone jack low level input
KICKER Sound without a radio!
Now you can have a complete audio system without a radio using the PXiRCX remote. The remote will control the PX-Series amplified controllers, the controllers have built in Bluetooth allowing you to audio directly to the amplifier. The PXiRCX remote allows you to control volume, power, source selection, shuffle, track up and track down, playlist up and playlist down. The control remote is perfect for motorcycles, sand rails or side-by-sides where space is limited but where tunes are absolutely necessary!
KICKER Tech
KICKER® PX-Series Amplifiers are full of advanced technology. PX Amplifiers are specially designed to deliver tremendous power in a tiny, weatherproof footprint, all while requiring minimal power from your charging system. Their compact size and efficiency make them perfect for sand-rails, motorcycles, and even jet ski's! With auto turn-on options, built-in crossovers and flexible input styles, KICKER® amps give you the custom sound you need.
Unbelievable power in a tiny package!
PX Amplifiers are no strangers to the KICKER® tradition of compact size. With as much as 100 watts of power, the only thing small about these amps is their footprint. Made to fit nearly anywhere, these miniature power plants start at under five inches in total width.
- Whether it's a a car, side-by-sides, motorcycle, or personal water-craft a small amplifier is what you want, but good is it without weatherproofing. The PX-Series amplifiers feature a weatherproof wiring harness, moisture-resistant circuit board and aluminum casing.
Kicker PXiBT502 Remote Control
- PXi Remote Control controls PX Series Amplified controllers
- Water resistant for use on watercrafts, quads, motorcycles and more
- Compatible with Kicker PXi50.2 amplifier that is ideal for motorcycles and other vehicles where conventional amplifiers will not fit
- Multiple controllers can be chained together for zone control
- Surface mount adds to the flexibility for the PXi50's included remote
- Includes 30 foot cable and Y-connector to control more than one amplifier
- Back-lit buttons with elegant blue color for easy viewing at night
- 3.5mm audio input for direct audio connection
- 1 - 3.5mm headphone jack low level input (500 - 1.75 mV)
- 1 - 12 volt illumination trigger
- 1 - 3.5mm control output
- Overall Dimensions: 1-3/16" (H) x 1-13/16" (L) x 3-11/16" (W)
- PX Series 15 Watt RMS Two-Channel Class D Amplifier
- Built in Bluetooth for audio streaming from phone
- A2DP Bluetooth connection allows music source to play wirelessly when connected via bluetooth
- 5-volt 1 amp USB charging port
- 3.5mm headphone jack low level input
- Conformal coated circuit board suitable for marine or ATV applications
- Amplifier is ideal for motorcycles and other vehicles where conventional amplifiers will not fit
- 3-way protection circuitry (thermal, overload, and speaker short protection)
- Heavy duty aluminum alloy heat-sink
- CEA-2006 compliant amplifier
- Includes 12 gauge power and ground wiring for installation
- Frequency Response: 20Hz to 20kHz +/- 1.0dB
- Signal to noise ratio: 90 dB
- 1 - 3.5mm headphone jack low level input (500 - 1.75 mV)
- 1 - 5-volt 1 amp USB charging port
- Total Power Output: 50 Watts
- 4-Ohms: 15 Watts x 2
- 2-Ohms: 25 Watts x 2
- Overall Dimensions: 1-15/16" (H) x 5-1/2" (L) x 3-7/16" (W)
Features:
-
Inputs and Outputs:
-
Dimensions:
Kicker PXiBT502 50 Watt 2-Channel Class D Car Amplifier
Amplifier Features:
-
Inputs and Outputs:
-
Max Power Output:
-
RMS Power Output:
- Current consumption:
- Recommended Fuse: 15 amp
Manufacturer | Kicker |
---|---|
Part Number | 40PXiBT502 |
Amplifier Topology Class | Class D |
Number of Channels | 2 Channel |
Amplifier Bridging | Not Bridgable |
Minimum Impedance in Un-Bridged Mode | 2 ohm |
Strappable Amplifier | No |
RCA Pre-amp Audio outputs | 1 Pair |
Preamp voltage | 2 volts |
Speaker level inputs | No |
Gain Control | No |
Bass Knob / Remote Gain | Yes |
Cooling Fan | No |
Color | Black |
Warranty | 2 Years |
CEA2006 Compliant | No |
UPC Code | 713034066972 |
Return period | 30 days |
Exchange period | 30 days |