Linear Actuators, Controllers, and Brackets
Linear Actuator - Linear Actuators are used to motorize nearly anything. Our Linear actuators are designed for the 12 volt environment and can be used to motorize your amp racks, sub-woofer enclosures, or hidden compartments. Linear Actuators are linear screws that are driven by a motor that propels a linear shaft. Our linear actuators are designed for car audio and marine applications. All of our linear actuators are designed to work in the most demanding application. All of our linear actuators are 12 volt and cost effective.
-
Quality Mobile Video TOP-A242 20 Amp Momentary off rocker switch$6.99- 3-position rocker switch for motion control when using linear or other actuators
- Momentary Off, Momentary On switch
- Button has forward and reverse direction with center off
-
Quality Mobile Video TOP-A687 8 Amp Momentary off rocker switch$7.99- Made in the U.S.A.
- Momentary Off, Momentary On switch
- Button has forward and reverse direction with center off
-
Quality Mobile Video TOP-8639T Linear Actuator Brackets$13.99- One-piece bracket for added strength
- Fits T and TP series Quality Mobile Video linear actuators
-
Quality Mobile Video TOP-8637CT Linear Actuator Brackets$13.99- One-piece bracket for added strength
- Fits all Quality Mobile Video linear actuators
- Top or Bottom Linear Actuator Mounting bracket
-
Quality Mobile Video TOP-8639CB Linear Actuator Brackets$17.99- One-piece bracket for added strength
- Fits C and CH series Quality Mobile Video linear actuators
- Bottom-Mounting bracket
-
Quality Mobile Video TOP-8639CT Linear Actuator Brackets$17.99- One-piece bracket for added strength
- Fits C and CH series Quality Mobile Video linear actuators
- Top-Mounting bracket
-
Quality Mobile Video TOP-A6100CL Linear Actuator Brackets$28.99 As low as $21.99- One-piece bracket for added strength
- Fits T and TP series Quality Mobile Video linear actuators
- Shaft-Mounted bracket
-
Quality Mobile Video TOP-8638 Linear Actuator Brackets$34.99- Two-piece bracket for added flexibility in mounting options
- Can be used as a top or bottom bracket
- Dimensions (H x W x L) 1" x 13/16" x 1 1/8"
-
Beuler 5086E Mechanical DPDT 12V Latching Relay$39.99- Mechanical latching relay
- 16 amp 12 Vdc rated contacts
- Dual DPDT micro switches - Dual pole dual throw
- Momentary 12 Vdc rated solenoid
- Power consumption @ 12Vdc 500 mA momentary
- Compatible with most insulated and non insulated terminals
-
Beuler BL200 Mechanical Latching Relay Single Coil$59.99- 12V Mechanical latching relay
- Perfect for motor control or dual battery activation
- Single Coil with SPST contacts- Single pole single throw
- 200 Amp switching capacity
-
Quality Mobile Video TOP-A6100TXK Wireless Linear Actuator controller with 100 foot range$62.99- Wireless control of linear actuators or other motorized devices
- Two wireless controls
- 100 foot range
- 5 amp output without relays
-
Accele INV-10 Capacitive Invisible Switch$74.99Out of stock- Designed to be placed under the surface of dash boards, trim panels, etc
- Works through surfaces up to 5mm thick
- Toggle or latched operation
- 3 Amp output
-
QMV 6101M Micro 12 Volt Linear Actuator with 1" stroke - 4.5 LB Pound Force capacity$77.99- The smallest 12 volt linear actuator on the market
- Stroke 1"
- Speed: 0.6 inch per second
- Capacity: 4.5 LB Pound Force
- Voltage: 12 volts DC
- Built in fixed limit switches, these are not adjustable
- Designed to push or pull a load along its full stroke length
-
QMV 6102M Micro 12 Volt Linear Actuator with 2" stroke - 4.5 LB Pound Force capacity$77.99- The smallest 12 volt linear actuator on the market
- Stroke 2"
- Speed: 0.6 inch per second
- Capacity: 4.5 LB Pound Force
- Voltage: 12 volts DC
- Built in fixed limit switches, these are not adjustable
- Designed to push or pull a load along its full stroke length
-
QMV 6103M Micro 12 Volt Linear Actuator with 3" stroke - 4.5 LB Pound Force capacity$77.99- The smallest 12 volt linear actuator on the market
- Stroke 3"
- Speed: 0.6 inch per second
- Capacity: 4.5 LB Pound Force
- Voltage: 12 volts DC
- Built in fixed limit switches, these are not adjustable
- Designed to push or pull a load along its full stroke length
Who Bought This Also Bought
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog