Add Backup Camera to Factory Radio - Speaker Replacement - Retain OEM Amplifier - Replace Factory Radio - Radio Replacement - Toyota Wiring Harness
Some factory radio's have a video input but the manufacturer opted to not install the camera due to vehicle package or options reasons. You can easily add a reverse camera to the factory radio with a simple harness. Add-a-camera harnesses make this very easy with a simple plug and play connector so you don't have to splice the factory power, ground and video signal to aftermarket back up camera.
Easily replace your factory speakers without cutting a single factory wire. Speaker replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice the factory speaker cables.
Retaining the factory amplifier is the easiest option when replacing a factory radio. In some vehicles retaining the factory amplifier is the only option. But your new stereo's sound is limited to what the factory amplifier's out capabilities are.
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Easily replace your factory speakers without cutting a single factory wire. Speaker replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice the factory speaker cables.
Retaining the factory amplifier is the easiest option when replacing a factory radio. In some vehicles retaining the factory amplifier is the only option. But your new stereo's sound is limited to what the factory amplifier's out capabilities are.
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Shop By
- Axxess AX-TYAMP1 2001 - and Up Lexus / Toyota radio replacement interface with navigation outputs - (Amplified Audio)$59.99
- Toyota complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes