Add Backup Camera to Factory Radio - Replace Factory Radio - Retain OEM Subwoofer - Add Amplifier to Factory Radio - Radio Replacement - Toyota Wiring Harness
Some factory radio's have a video input but the manufacturer opted to not install the camera due to vehicle package or options reasons. You can easily add a reverse camera to the factory radio with a simple harness. Add-a-camera harnesses make this very easy with a simple plug and play connector so you don't have to splice the factory power, ground and video signal to aftermarket back up camera.
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM subwoofer for your bass notes. Subwoofer retention harnesses make this very easy with a simple plug and play connector so you don't have to splice signal wires to aftermarket connectors that your new aftermarket radio can use to send the audio signals to the factory subwoofer.
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM subwoofer for your bass notes. Subwoofer retention harnesses make this very easy with a simple plug and play connector so you don't have to splice signal wires to aftermarket connectors that your new aftermarket radio can use to send the audio signals to the factory subwoofer.
Shop By
- Axxess AX-TYAMP1 2001 - and Up Lexus / Toyota radio replacement interface with navigation outputs - (Amplified Audio)$59.99
- Toyota complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes