Retain OEM Backup Camera - Replace Factory Radio - Saturn Wiring Harness
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM backup camera. Factory backup camera retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and video signal to aftermarket connectors that your new aftermarket radio can use.
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Shop By
-
Axxess BACKUPCAM Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn, Suzuki Factory backup camera retention harness$11.99
- Fits 2006 - 2013 select Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn, Suzuki vehicles
- Use your factory back up camera with an aftermarket car stereo
- Plug-and-play installation for quick installation
- Provides 12 volt dc output for factory camera
-
Metra 70-2102 Turbowires for 2004 - 2005 GM and Saturn Wiring Harness$12.99
- Used to install and aftermarket car stereo for select GM and Saturn vehicles
- Includes 24 Pin factory plug
- Allows for the installation of an aftermarket radio using the existing factory wiring and connectors
- No cutting of factory wiring needed
-
Axxess AX-GMLAN11 2006 - 2012 GM radio replacement interface with navigation outputs$51.99
- Chevrolet, Pontiac, Saturn complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for non-amplified models, amplified models, or when bypassing a factory amplifier
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
-
Axxess AX-GMLAN11-SWC 2006 - 2009 GM radio replacement interface with steering wheel and navigation outputs - (Non-Amplified Audio)$123.99
- General Motors complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory AUX-IN jack
- Interface is designed for amplified and non-amplified audio systems
-
Axxess AX-GMCL2-SWC 2003 - 2013 GM Radio Replacement Interface with steering wheel and navigation outputs$169.99
- Fits 2003 - 2013 model years
- Complete General Motors radio replacement interface with steering wheel control retention
- Provides connections for aftermarket stereo to factory audio system without cutting cables
- Retains RSE (rear seat entertainment)
- Retains SAT (satellite radio)
- USB updatable