Retain OEM Amplifier - Replace Factory Radio - Retain OEM USB Input - Radio Interfaces
Retaining the factory amplifier is the easiest option when replacing a factory radio. In some vehicles retaining the factory amplifier is the only option. But your new stereo's sound is limited to what the factory amplifier's out capabilities are.
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM USB port. Factory USB retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and USB signals to USB connector that your new aftermarket radio can use.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM USB port. Factory USB retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and USB signals to USB connector that your new aftermarket radio can use.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Onstar adaptors - Onstar adaptors allow you to remove your factory radio and install a new factory radio while retaining all of the factoyr Onstar features.
Shop By
- Metra XSVI-5521-NAV Car Stereo Interface harness for 2007 - and Up Ford with Factory Subwoofer$70.99
- Audio interface harness and control box for 2007 and Up Ford vehicles
- Complete car stereo integration harness for Non-Amplified audio systems
- Can be used when removing the Sony / THX audio systems
- Provides RAP (Retained Accessory Power), navigation outputs like reverse, parking brake, VSS, etc., and high level speaker input
- High level speaker inputs for connections to factory speakers
- Low level subwoofer connections
- Includes a prewired ASWC-1 connector
- Metra LC-GMRC-044 2011 - and Up GM Data Bus Radio Replacement Interface$71.99
- Complete car stereo integration harness for Non-Amplified audio systems or when removing factor amplifier
- Provides RAP (Retained Accessory Power)
- High level speaker inputs for connections to factory speakers
- Retains all warning chimes with built in speaker
- 12 volt 10 amp car accessory
- Metra LC-GMRC-05 Economy Radio Replacement Data Bus interface with Chime Retention Speaker$71.99
- Designed for GM vehicles with Class 2 data buss
- Provides accessory output for databus signals (12-volt 3-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory amplified and non-amplified systems or when removing the amplified audio system
- Does not retain OnStar
- Retains all factory warning chimes with built in speaker
- Metra USB-CAB Firmware Update Cable for Axxess interfaces$71.99
- Easily update the firmware of all Axxess interfaces with the USB-CAB USB cable
- Continous updates are made available by Metra, with this cable it is very easy to update your interface
- Ensure continuous compatibility with your vehicle
- Axxess AX-FD1 2007 - and Up Ford radio replacement CAN-BUS interface with navigation outputs$72.99Out of stock
- Ford complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for both non-amplified and amplified models (including SYNC/Sony/THX)
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory Subwoofer and Center channel
- Axxess AX-HYKIA-SPDIF 2012 - 2016 Hyundai / Kia radio replacement SPDIF Digital audio input adapter$73.99
- Hyundai / Kia SPDIF input adapter for plug-and-play installation of an aftermarket car radio
- Must be used with AX-HYKIA1-SWC or AX-HYKIA2-SWC
- Used in amplified models only
- Metra TYTO-01 2001 and Up Lexus and Toyota amplified audio system interface$73.99
- Integrates with JBL Toyota Audio systems
- Designed for Lexus audio systems
- Interface is designed to be used with factory amplified systems and converts aftermarket radio outputs to factory amplified audio system inputs
- 4 - High level speaker inputs makes connections for aftermarket car stereo's to factory speakers easy
- USB firmware updatable
- PAC C2R-CHYNA For Chrysler Vehicles with No Factory Amplifier$74.99PAC C2R-CHYNA For Chrysler Vehicles with No Factory Amplifier Learn More
- PAC MAZATO Radio Replacement Interface for Mazda$74.99PAC MAZATO Radio Replacement Interface for Mazda Learn More
- Metra LC-GMRC-03 Car Stereo Interface for 1997- 2005 select Cadillac vehicles with chime retention speaker$75.99
- Provides accessory output form databus signals (12-volt 10-amp)
- Retains R.A.P. (Retained Accessory Power), if equipped so radio stays on as long as doors stay closed
- Used in non-amplified systems or when replacing amplified systems
- Retains all warning chimes through onboard speaker
- Provides all necessary outputs for an aftermarket car stereo to connect to a databus equipped vehicle
- Axxess AX-CH013 2004 - and Up Chrysler radio replacement CAN-BUS interface with navigation outputs$77.99
- Chrysler, Jeep, Mitsubishi, and Volkswagen complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for non-amplified models, amplified models, or when bypassing a factory amplifier
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Pac RP3-GM12 Radio Replacement Interface for Select GM(R) Vehicles (Class II Databus, 24-Pin Harness, Chevrolet(R) Equinox 2005-2006 & Pontiac(R) Torrent 2006)$79.99
- Pac RP3-GM12 Radio Replacement Interface for Select GM(R) Vehicles (Class II Databus, 24-Pin Harness, Chevrolet(R) Equinox 2005-2006 & Pontiac(R) Torrent 2006)
- Wiring Interfaces
- idataLink Maestro HRN-HRR-TO2 Radio Replacement and Steering Wheel Interface Harness for 2012 - 2018 Toyota Vehicles$79.99
- Fits select 2012 - 2018 Toyota Vehicles
- Plug-and-Play T-harness for ADS-MRR or ADS-MRR2 Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
- idataLink Maestro HRN-HRR-HO2 Radio Replacement and Steering Wheel Interface Harness for 2008 - 2018 Honda Vehicles$79.99
- Fits select 2008 - 2018 Honda Vehicles
- lug-and-Play T-harness for ADS-MRR or ADS-MRR2 Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
- Axxess MZCC-01 2011 - 2012 Mazda CX-9 A/C Control retention interface$80.99Out of stock
- Mazda complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retain the climate control functions for the 2011-2012 Mazda CX-9 without the Bose amplified sound system
- Retains the factory A/C controls with the aftermarket stereo
- Provides power and communication to factory systems