Replace Factory Radio - Retain OE AUX Input - Radio Interfaces
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Retaining the factory 3.5mm Auxiliary input when replacing your factory radio with and aftermarket radio is important when you want to connect an external device easily to the inputs of the aftermarket radio, these harnesses make that easy.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Retaining the factory 3.5mm Auxiliary input when replacing your factory radio with and aftermarket radio is important when you want to connect an external device easily to the inputs of the aftermarket radio, these harnesses make that easy.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Onstar adaptors - Onstar adaptors allow you to remove your factory radio and install a new factory radio while retaining all of the factoyr Onstar features.
Shop By
-
Metra XSVI-6502-NAV 2004 - 2010 Chrysler Data Bus interface with Navigation outputs$65.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2004 - 2010 Chrylser vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
- Provides steering wheel interface outputs
-
Metra XSVI-5520-NAV Car Stereo Interface harness and control box for 2006 - and Up Ford with Navigation$65.99- Audio interface harness and control box for 2007 and Up Ford vehicles
- Complete car stereo integration harness for Non-Amplified audio systems
- Can be used when removing the Sony/ THX audio systems
- Provides RAP (Retained Accessory Power), navigation outputs like reverse, parking brake, VSS, etc., and high level speaker input
- High level speaker inputs for connections to factory speakers
- Includes a prewired ASWC-1 connector
-
Metra XSVI-2105-NAV 2006 - and Up GM LAN Bus interface with Navigation outputs$65.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2006 - and Up LAN-Bus GM vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Interface will not retain factory chimes
- Interface will not retain OnStar
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
- Pre-wired for ASWC steering wheel interface
-
Metra XSVI-2104-NAV 2006 - 2012 General Motors GM-LAN Data Bus interface with Navigation outputs$65.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2006 - 2012 GM-LAN Data-Bus GM vehicles
- Provides accessory output for databus signals (12-volt 3-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Interface will not retain factory chimes
- Interface will not retain OnStar
-
Metra XSVI-2103-NAV 2004 - 2008 GM LAN Data Bus interface with Navigation outputs$65.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
- Does not retain factory warning chimes
- Not for vehicles with OnStar
-
Metra XSVI-2003-NAV 2005 - and Up GM Class-2 Data Bus interface with Navigation outputs$65.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2005 - and Up Class-2 Data-Bus GM vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Interface will not retain factory chimes
- Interface will not retain OnStar
- Pre-wired for ASWC steering wheel interface control
-
Metra LC-BMRC-01 Car Stereo Interface for 2006 - 2015 select BMW and Mini vehicles with chime retention speaker$65.99- Provides accessory output form databus signals (12-volt 10-amp)
- Retains R.A.P. (Retained Accessory Power), if equipped so radio stays on as long as doors stay closed
- Used in non-amplified systems or when replacing amplified systems
- Retains all warning chimes through onboard speaker
- Provides all necessary outputs for an aftermarket car stereo to connect to a databus equipped vehicle
-
Metra XSVI-9003-NAV 2002 - and Up Volkswagen CAN-Bus interface with Navigation outputs$66.99- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2002 - and Up Volkswagen CAN-Bus vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or factory amplified audio systems
- Interface will not work with Fender Audio systems
- Interface will work with Monsoon and Dynaudio system
- Perfect for use with aftermarket navigation system as interface provides navigation system outputs (parking brake, reverse, mute, V.S.S.) from databus signals
- Pre-wired for ASWC steering wheel interface Learn More
-
DISCONTINUED - Metra AFDI-RSE-01 Ford / Lincoln / Mercury Can-Bus Rear seat entertainment system Interface$67.99Out of stock- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 207 - and Up Ford vehicles with factory rear seat entertainment systems
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or factory amplified audio systems
- Interface willl allow factory overhead DVD system to work with an aftermarket radio
- Provides rear seat audio output so that you can connect to Aux input on an aftermarket car stereo via RCA cables or 3.5mm jack
-
Metra XSVI-9006-NAV 2015 - and Up Volkswagen Golf / Jetta / Passat Radio interface with Navigation outputs$68.99Out of stock- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2015 - and Up Volkswagen vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed
- Interface is designed to be used with factory non-amplified audio systems
-
Metra LC-CHRC-01 Radio Replacement Data Bus interface with Chime Retention Speaker for 2013 and Up Dodge Ram pickup trucks$69.99- Designed for 2013 and Up Dodge Ram pickup trucks
- Provides accessory output for databus signals (12-volt 3-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Retains the 3.5mm AUX-IN jack
- Retains all factory warning chimes with built in speaker
-
idataLink Maestro HRN-HRR-CH3 Radio Replacement and Steering Wheel Interface Harness for 2013 - 2018 Chrysler, Dodge, Fiat and Jeep Vehicles$69.99- Fits select 2013 - 2018 Chrysler, Dodge, Fiat and Jeep Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
-
Metra XSVI-5521-NAV Car Stereo Interface harness for 2007 - and Up Ford with Factory Subwoofer$70.99- Audio interface harness and control box for 2007 and Up Ford vehicles
- Complete car stereo integration harness for Non-Amplified audio systems
- Can be used when removing the Sony / THX audio systems
- Provides RAP (Retained Accessory Power), navigation outputs like reverse, parking brake, VSS, etc., and high level speaker input
- High level speaker inputs for connections to factory speakers
- Low level subwoofer connections
- Includes a prewired ASWC-1 connector
-
Metra USB-CAB Firmware Update Cable for Axxess interfaces$71.99- Easily update the firmware of all Axxess interfaces with the USB-CAB USB cable
- Continous updates are made available by Metra, with this cable it is very easy to update your interface
- Ensure continuous compatibility with your vehicle
-
Metra LC-GMRC-044 2011 - and Up GM Data Bus Radio Replacement Interface$71.99- Complete car stereo integration harness for Non-Amplified audio systems or when removing factor amplifier
- Provides RAP (Retained Accessory Power)
- High level speaker inputs for connections to factory speakers
- Retains all warning chimes with built in speaker
- 12 volt 10 amp car accessory
Who Bought This Also Bought
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog