Replace Factory Radio - Retain OE AUX Input - Retain OEM Backup Camera - Radio Interfaces
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Retaining the factory 3.5mm Auxiliary input when replacing your factory radio with and aftermarket radio is important when you want to connect an external device easily to the inputs of the aftermarket radio, these harnesses make that easy.
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM backup camera. Factory backup camera retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and video signal to aftermarket connectors that your new aftermarket radio can use.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Retaining the factory 3.5mm Auxiliary input when replacing your factory radio with and aftermarket radio is important when you want to connect an external device easily to the inputs of the aftermarket radio, these harnesses make that easy.
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM backup camera. Factory backup camera retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and video signal to aftermarket connectors that your new aftermarket radio can use.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Onstar adaptors - Onstar adaptors allow you to remove your factory radio and install a new factory radio while retaining all of the factoyr Onstar features.
Shop By
- Axxess AX-GMLAN11 2006 - 2012 GM radio replacement interface with navigation outputs$51.99
- Chevrolet, Pontiac, Saturn complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for non-amplified models, amplified models, or when bypassing a factory amplifier
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
- idataLink Maestro HRN-RR-TO2 Radio Replacement and Steering Wheel Interface Harness for 2012 - 2018 Toyota Vehicles$64.99
- Fits select 2012 - 2018 Toyota Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
- Metra TYTO-01 2001 and Up Lexus and Toyota amplified audio system interface$73.99
- Integrates with JBL Toyota Audio systems
- Designed for Lexus audio systems
- Interface is designed to be used with factory amplified systems and converts aftermarket radio outputs to factory amplified audio system inputs
- 4 - High level speaker inputs makes connections for aftermarket car stereo's to factory speakers easy
- USB firmware updatable
- Axxess AX-GMCL2-SWC 2003 - 2013 GM Radio Replacement Interface with steering wheel and navigation outputs$169.99
- Fits 2003 - 2013 model years
- Complete General Motors radio replacement interface with steering wheel control retention
- Provides connections for aftermarket stereo to factory audio system without cutting cables
- Retains RSE (rear seat entertainment)
- Retains SAT (satellite radio)
- USB updatable