Replace Factory Radio - Retain Factory Steering Wheel Controls - Retain OEM USB Input - Radio Interfaces
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Retaining your factory steering wheel controls when replacing your factory radio with an aftermarket radio is extremely important for safety and easy of use. Factory steering wheel retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and steering wheel signals to aftermarket interface that your new aftermarket radio can use.
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM USB port. Factory USB retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and USB signals to USB connector that your new aftermarket radio can use.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Retaining your factory steering wheel controls when replacing your factory radio with an aftermarket radio is extremely important for safety and easy of use. Factory steering wheel retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and steering wheel signals to aftermarket interface that your new aftermarket radio can use.
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM USB port. Factory USB retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and USB signals to USB connector that your new aftermarket radio can use.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Onstar adaptors - Onstar adaptors allow you to remove your factory radio and install a new factory radio while retaining all of the factoyr Onstar features.
Shop By
- idataLink Maestro ACC-USB-TO2 USB Retention harness for 2012 - 2018 Scion, Subaru, and Toyota vehicles$24.99
- Retain your factory USB jack panel and capabilities when you install an after-market radio
- Compatible with select 2012 - 2018 Scion, Subaru, and Toyota vehicles
- Plug & Play Harness and requires no modification to factory wiring
- Axxess AX-GMLAN11 2006 - 2012 GM radio replacement interface with navigation outputs$51.99
- Chevrolet, Pontiac, Saturn complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for non-amplified models, amplified models, or when bypassing a factory amplifier
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
- idataLink Maestro HRN-RR-TO2 Radio Replacement and Steering Wheel Interface Harness for 2012 - 2018 Toyota Vehicles$64.99
- Fits select 2012 - 2018 Toyota Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
- Metra LC-BMRC-01 Car Stereo Interface for 2006 - 2015 select BMW and Mini vehicles with chime retention speaker$65.99
- Provides accessory output form databus signals (12-volt 10-amp)
- Retains R.A.P. (Retained Accessory Power), if equipped so radio stays on as long as doors stay closed
- Used in non-amplified systems or when replacing amplified systems
- Retains all warning chimes through onboard speaker
- Provides all necessary outputs for an aftermarket car stereo to connect to a databus equipped vehicle
- Metra TYTO-01 2001 and Up Lexus and Toyota amplified audio system interface$73.99
- Integrates with JBL Toyota Audio systems
- Designed for Lexus audio systems
- Interface is designed to be used with factory amplified systems and converts aftermarket radio outputs to factory amplified audio system inputs
- 4 - High level speaker inputs makes connections for aftermarket car stereo's to factory speakers easy
- USB firmware updatable
- Pac OS-2C Bose Onstar Interface For Class Ii Vehicles Equipped With Factory Bose Systems$123.99Out of stockPac Os-2C Bose Onstar Interface For Class Ii Vehicles Equipped With Factory Bose Systems Learn More
- Metra GMOS-09 2000 - 2004 GM OnStar Class II Data Bus Interface for Amplified Audio Systems$123.99
- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in Non-Amplified audio systems
- Retains chimes
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
- Fits select Oldsmobile and Pontiac vehicles with amplified audio systems
- Axxess AX-GMLAN11-SWC 2006 - 2009 GM radio replacement interface with steering wheel and navigation outputs - (Non-Amplified Audio)$123.99
- General Motors complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory AUX-IN jack
- Interface is designed for amplified and non-amplified audio systems
- Metra CHTO-02 2004 - 2007 Chrysler/Dodge amplified data interface$129.99
- Interface for Dodge and Chrysler vehicles with factory amplifiers and data-bus systems
- Provides output signals from factory bus system
- Provides constant 12 volt output
- Provides accessory 12 volt output
- Retains retained accessory power while doors remain closed
- Prewired for Metra ASWC steering wheel interface
- Provides 4 - speaker connections
- Provides parking brake, reverse, mute, V.S.S. connections Learn More
- Axxess AX-HYKIA2-SWC 2012 - 2016 Hyundai Veloster radio replacement interface with steering wheel and navigation outputs$129.99
- Hyundai Veloster complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Interface is designed for amplified and non-amplified audio systems
- idataLink ADS-MRR Maestro RR Radio Replacement Interface with Steering Wheel Controls$139.99
- Radio Replacement Interface with Steering wheel Control and Factory Amp Integration
- Allows for integration of factory steering wheel controls and factory amplifier with an aftermarket stereo
- Retains OnStar, SYNC and uConnect in select vehicles
- Before installing you must program the adapter at the iDatalink site to work with your particular vehicle
- Axxess AX-GMCL2-SWC 2003 - 2013 GM Radio Replacement Interface with steering wheel and navigation outputs$169.99
- Fits 2003 - 2013 model years
- Complete General Motors radio replacement interface with steering wheel control retention
- Provides connections for aftermarket stereo to factory audio system without cutting cables
- Retains RSE (rear seat entertainment)
- Retains SAT (satellite radio)
- USB updatable
- Axxess AX-HYKIA4-SWC 2010 - 2013 Hyundai / Kia radio replacement interface with steering wheel and navigation outputs$201.99Out of stock
- 2010 - 2013 Hyundai / Kia complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Interface is designed for amplified and non-amplified audio systems
- Retains the factory AUX-IN jack
- Retains the factory backup camera