Replace Factory Radio - Retain Factory Steering Wheel Controls - Retain OE AUX Input - Radio Interfaces
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Retaining your factory steering wheel controls when replacing your factory radio with an aftermarket radio is extremely important for safety and easy of use. Factory steering wheel retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and steering wheel signals to aftermarket interface that your new aftermarket radio can use.
Retaining the factory 3.5mm Auxiliary input when replacing your factory radio with and aftermarket radio is important when you want to connect an external device easily to the inputs of the aftermarket radio, these harnesses make that easy.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Retaining your factory steering wheel controls when replacing your factory radio with an aftermarket radio is extremely important for safety and easy of use. Factory steering wheel retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and steering wheel signals to aftermarket interface that your new aftermarket radio can use.
Retaining the factory 3.5mm Auxiliary input when replacing your factory radio with and aftermarket radio is important when you want to connect an external device easily to the inputs of the aftermarket radio, these harnesses make that easy.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Onstar adaptors - Onstar adaptors allow you to remove your factory radio and install a new factory radio while retaining all of the factoyr Onstar features.
Shop By
- PAC C2R-GM11 11-Bit Interface for 2007 GM vehicles with No OnStar System$98.99PAC C2R-GM11 11-Bit Interface for 2007 GM vehicles with No OnStar System Learn More
- PAC C2R-GM11B Radio Replacement Interface 2005-2006 Cobalt 2004-2007 Malibu 2005-2007 G6 No OnStar$98.99PAC C2R-GM11B Radio Replacement Interface 2005-2006 Cobalt 2004-2007 Malibu 2005-2007 G6 No OnStar Learn More
- PAC C2R-GM29 29-Bit Interface for 2007 GM vehicles with No OnStar System$98.99PAC C2R-GM29 29-Bit Interface for 2007 GM vehicles with No OnStar System Learn More
- Metra CHTO-01 2004 - 2010 Chrysler, Jeep, Mitsubishi Car Stereo interface kit$98.99
- Easily remove the factory stereo in an otherwise impossible situation
- Interface provides accessory power
- Interface retains R.A.P. (retained accessory power)
- Compatible with amplified, non-amplified systems, or digital amplified factory audio systems
- Steering wheel control outputs
- Provides Navigation outputs for aftermarket navigation systems
- Metra XSVI-6523-NAV 2013 - and Up Chrysler CAN Bus interface with Navigation outputs$98.99
- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy in select 2013 - and Up Can-Bus Chrysler vehicles
- Provides accessory output for databus signals (12-volt 10-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory amplified or non-amplified audio systems
- Retains back-up camera (if through the OE radio)
- Retains the use of the 3.5mm AUX jack
- idataLink Maestro HRN-HRR-GM3 Radio Replacement and Steering Wheel Interface Harness for 2014 - 2018 Chevrolet and GMC Vehicles$99.99
- Fits select 2014 - 2018 Chevrolet and GMC Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
- Metra HDCC-01 Honda Clock retention interface$110.99
- Fits 2012 - 2013 select Honda vehicles
- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
- Metra TYTO-02 2013 and Up Toyota amplified audio system interface$110.99
- Integrates with Toyota Amplified audio systems
- Interface is designed to be used with factory amplified systems and converts aftermarket radio outputs to factory amplified audio system inputs
- 4 - High level speaker inputs makes connections for aftermarket car stereo's to factory speakers easy
- USB firmware updatable
- Metra CHTO-03 2007 - and Up Chrysler, Dodge, Jeep, Mitsubishi Car Stereo interface kit$110.99
- Easily remove the factory stereo in an otherwise impossible situation
- Interface provides accessory power
- Interface retains R.A.P. (retained accessory power)
- Compatible with amplified, non-amplified systems, or digital amplified factory audio systems
- Steering wheel control outputs
- Provides Navigation outputs for aftermarket navigation systems
- Axxess AX-MB1-SWC 2001 - and Up Mercedes Benz radio replacement interface with steering wheel and navigation outputs$110.99Out of stock
- Mercedes complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for non-amplified models or when bypassing a factory amplifier
- Built in steering wheel control interface
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Pac C2R-Vw2 Radio Replacement Interface With Navigation Outputs For Select Volkswagen Vehicles$111.99Pac C2R-Vw2 Radio Replacement Interface With Navigation Outputs For Select Volkswagen Vehicles Learn More
- PAC C2R-CHY4 Radio Replacement Interface for select Chrysler, Dodge, and Jeep CAN-Bus vehicles$111.99
- Designed to allow the easy installation of an aftermarket car stereo in Chrysler, Dodge, and Jeep vehicles
- Replicates factory warning chimes & provides a data-bus generated 12V accessory power output that is fully compatible with GM ’s retained accessory power system
- Keeps the radio powered after key-off
- Issues data commands that maintain a health system status to other vehicle’s systems
- Retains all warning chimes including backup chimes, memory seats, low fuel, door/hatch ajar & others
- PAC OS-1 OnStar Adaptor Radio Replacement Interface Cadillac, Chevrolet, GMC, Pontiac and Oldsmobile 1998-2002 Vehicles$111.99PAC OS-1 OnStar Adaptor Radio Replacement Interface Cadillac, Chevrolet, GMC, Pontiac and Oldsmobile 1998-2002 Vehicles Learn More
- Axxess AX-TYAMP1-SWC 2003 - and Up Toyota radio replacement interface with steering wheel and navigation outputs$118.99
- Toyota complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Built in steering wheel interface controller
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in amplified audio systems
- Axxess AX-MAZ1-SWC Mazda radio replacement interface with steering wheel and navigation outputs$120.99
- Mazda complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Designed for amplified and non-amplified models, or when bypassing a factory amp
- Built in steering wheel control interface
- Provides NAV outputs (parking brake, reverse, and speed sense)