Chevrolet - Replace Factory Radio - Retain Factory Steering Wheel Controls - Retain OE AUX Input - Retain OEM Subwoofer - Radio Interfaces
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Retaining your factory steering wheel controls when replacing your factory radio with an aftermarket radio is extremely important for safety and easy of use. Factory steering wheel retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and steering wheel signals to aftermarket interface that your new aftermarket radio can use.
Retaining the factory 3.5mm Auxiliary input when replacing your factory radio with and aftermarket radio is important when you want to connect an external device easily to the inputs of the aftermarket radio, these harnesses make that easy.
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM subwoofer for your bass notes. Subwoofer retention harnesses make this very easy with a simple plug and play connector so you don't have to splice signal wires to aftermarket connectors that your new aftermarket radio can use to send the audio signals to the factory subwoofer.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Retaining your factory steering wheel controls when replacing your factory radio with an aftermarket radio is extremely important for safety and easy of use. Factory steering wheel retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and steering wheel signals to aftermarket interface that your new aftermarket radio can use.
Retaining the factory 3.5mm Auxiliary input when replacing your factory radio with and aftermarket radio is important when you want to connect an external device easily to the inputs of the aftermarket radio, these harnesses make that easy.
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM subwoofer for your bass notes. Subwoofer retention harnesses make this very easy with a simple plug and play connector so you don't have to splice signal wires to aftermarket connectors that your new aftermarket radio can use to send the audio signals to the factory subwoofer.
Car radio replacement radio interfaces allow you to remove your factory radio and install a new factory radio while retaining all of the factory features.
Onstar adaptors - Onstar adaptors allow you to remove your factory radio and install a new factory radio while retaining all of the factoyr Onstar features.
Shop By
- idataLink Maestro HRN-AV-GM5 Rear Seat Entertainment System Audio Video input harness for 2008 - 2017 Buick, Cadillac, Chevrolet, GMC, Hummer and Saturn Vehicles$42.99
- Fits select 2008 - 2017 Buick, Cadillac, Chevrolet, GMC, Hummer and Saturn Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Allows the installation of an aftermarket car stereo touchscreen receiver and retain OEM Rear audio video system
- Axxess AX-GMCL2 2000 - 2013 GM Radio Replacement Interface with navigation outputs$49.99
- Fits 2000 - 2013 model years
- Complete General Motors radio replacement interface
- Provides connections for aftermarket stereo to factory audio system without cutting cables
- Retains RSE (rear seat entertainment)
- Retains SAT (satellite radio)
- USB updatable
- Axxess AX-GMLAN29 2006 - and Up GM radio replacement LAN-BUS interface with steering wheel and navigation outputs$49.99Out of stock
- Buick, Cadillac, Chevrolet, GMC, Hummer, Pontiac, Saturn, Suzuki complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Requires external steering wheel controller
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Designed for non-amplified models, analog amplified models, or when bypassing a factory amp
- Axxess AX-GMLAN11 2006 - 2012 GM radio replacement interface with navigation outputs$51.99
- Chevrolet, Pontiac, Saturn complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Interface is designed for non-amplified models, amplified models, or when bypassing a factory amplifier
- Pre-wired for steering wheel control interface (Sold separately)
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Metra LC-GMRC-LAN-10 Economy Data Bus interface with Chime Retention Speaker$55.99
- Provides accessory output for databus signals (12-volt 3-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Retains factory back up camera
- Interface is designed to be used with factory non-amplified systems or when removing the amplified audio system
- Retains all factory warning chimes with built in speaker
- Provides all connections to factory wiring and makes installing an aftermarket stereo very easy
- Axxess AX-GMLAN112 2006 - 2012 GM radio replacement LAN-BUS interface with navigation outputs$60.99
- General Motors complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Interface is designed for amplified and non-amplified audio systems
- Metra LC-GMRC-05 Economy Radio Replacement Data Bus interface with Chime Retention Speaker$71.99
- Designed for GM vehicles with Class 2 data buss
- Provides accessory output for databus signals (12-volt 3-amp capable output)
- Retains R.A.P. (retained accessory power) while doors remain closed so you can continue to listen to the radio until doors open
- Interface is designed to be used with factory amplified and non-amplified systems or when removing the amplified audio system
- Does not retain OnStar
- Retains all factory warning chimes with built in speaker
- idataLink Maestro HRN-HRR-GM3 Radio Replacement and Steering Wheel Interface Harness for 2014 - 2018 Chevrolet and GMC Vehicles$99.99
- Fits select 2014 - 2018 Chevrolet and GMC Vehicles
- Plug-and-Play T-harness for ADS-MRR Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
- Axxess AX-GMLAN11-SWC 2006 - 2009 GM radio replacement interface with steering wheel and navigation outputs - (Non-Amplified Audio)$123.99
- General Motors complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Retains the factory AUX-IN jack
- Interface is designed for amplified and non-amplified audio systems
- Axxess GMOS-LAN-08 OnStar Interface for 2012 - 2016 Cadillac, Chevrolet and GMC Vehicles$129.99
- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Retains factory auxiliary input
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
- Axxess AX-GMLAN44-SWC 2012 - 2016 GM radio replacement LAN-BUS interface with steering wheel and navigation outputs$139.99
- Cadillac, Chevrolet, GMC complete radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Interface is designed for amplified and non-amplified audio systems
- Axxess GMOS-LAN-07 OnStar Interface for 2007 - 2016 Cadillac, Chevrolet and GMC Vehicles$159.99
- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Retains factory auxiliary input
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
- Axxess AX-GMCL2-SWC 2003 - 2013 GM Radio Replacement Interface with steering wheel and navigation outputs$169.99
- Fits 2003 - 2013 model years
- Complete General Motors radio replacement interface with steering wheel control retention
- Provides connections for aftermarket stereo to factory audio system without cutting cables
- Retains RSE (rear seat entertainment)
- Retains SAT (satellite radio)
- USB updatable
- Axxess AX-ADGM100 2000 - and Up GM RSE / Onstar / Bose Radio Replacement Interface$220.99
- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Covers Class ll, LAN 29 and LAN 11 vehicles
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in amplified or non amplified systems
- Retains chimes
- Retains OnStar/OE Bluetooth
- Retains factory Back-up camera and RSE (rear seat entertainment)
- Axxess GMOS-MOST-02 2014 - and Up Chevrolet radio replacement MOST-BUS interface with steering wheel and navigation outputs$299.99Out of stock
- 2014 - and Up Chevrolet Corvette and Impala radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Interface is designed for amplified MOST-BUS audio systems