Replace Factory Radio - Retain OEM USB Input - Honda Wiring Harness
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM USB port. Factory USB retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and USB signals to USB connector that your new aftermarket radio can use.
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM USB port. Factory USB retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and USB signals to USB connector that your new aftermarket radio can use.
Shop By
- idataLink Maestro HRN-HRR-HO2 Radio Replacement and Steering Wheel Interface Harness for 2008 - 2018 Honda Vehicles$79.99
- Fits select 2008 - 2018 Honda Vehicles
- lug-and-Play T-harness for ADS-MRR or ADS-MRR2 Interface
- Install and aftermarket car stereo receiver and retain all OEM features and audio system
- Provides inputs and output to aftermarket car stereo receiver (Speaker, Power/Ground, Illumination, and Navigation)
- Displays engine performance data on touchscreen with select Alpine, JVC, Kenwood and Pioneer receivers
- Metra HDCC-01 Honda Clock retention interface$110.99
- Fits 2012 - 2013 select Honda vehicles
- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
- Metra HDCC-02 Honda LaneWatch camera retention interface$139.99
- Fits 2014 - 2015 select Honda vehicles
- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)