Replace Factory Radio - Speaker Replacement - Retain OEM Backup Camera - GM Wiring Harness
When replacing your factory radio with an aftermarket radio you will want to not cut any of the factory wiring. Radio replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and speaker connections to the aftermarket radio connector that is included with your new aftermarket radio.
Easily replace your factory speakers without cutting a single factory wire. Speaker replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice the factory speaker cables.
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM backup camera. Factory backup camera retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and video signal to aftermarket connectors that your new aftermarket radio can use.
Easily replace your factory speakers without cutting a single factory wire. Speaker replacement harnesses make this very easy with a simple plug and play connector so you don't have to splice the factory speaker cables.
When replacing your factory radio with an aftermarket radio you will want to most likely retain your OEM backup camera. Factory backup camera retention harnesses make this very easy with a simple plug and play connector so you don't have to splice power, ground and video signal to aftermarket connectors that your new aftermarket radio can use.
Shop By
-
Axxess GMOS-LAN-09 OnStar Interface for 2014 - and Up GM Vehicles$159.99- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Retains factory auxiliary input
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
-
Axxess GMOS-LAN-07 OnStar Interface for 2007 - 2016 Cadillac, Chevrolet and GMC Vehicles$159.99- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in non-amplified audio systems
- Retains chimes
- Retains factory auxiliary input
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
-
Axxess AX-ADGM100 2000 - and Up GM RSE / Onstar / Bose Radio Replacement Interface$220.99- Easily remove the factory stereo in an otherwise impossible situation and replace it with an aftermarket stereo and retain all of the factory functions
- Covers Class ll, LAN 29 and LAN 11 vehicles
- Provides accessory (12-volt 10-amp)
- Retains R.A.P. (retained accessory power)
- Used in amplified or non amplified systems
- Retains chimes
- Retains OnStar/OE Bluetooth
- Retains factory Back-up camera and RSE (rear seat entertainment)
-
Axxess GMOS-MOST-01 MOST-Bus Interface for 2014 - and Up GM Vehicles$299.99Out of stock- Easily remove the factory stereo and replace it with an aftermarket stereo and retain all of the factory functions
- Retains R.A.P. (retained accessory power)
- Retains OnStar system
- Retains OEM Bluetooth system
- Used in M.O.S.T. amplified audio systems
- Retains factory back up camera
- Retains chimes
- Retains factory 3.5mm auxiliary input
- Provides NAV outputs (parking brake, reverse, mute, V.S.S.)
-
Axxess GMOS-MOST-02 2014 - and Up Chevrolet radio replacement MOST-BUS interface with steering wheel and navigation outputs$299.99Out of stock- 2014 - and Up Chevrolet Corvette and Impala radio replacement interface for plug-and-play installation of an aftermarket car radio
- Retains factory audio system and vehicle chimes
- Retains steering wheel controls
- Provides NAV outputs (parking brake, reverse, and speed sense)
- Interface is designed for amplified MOST-BUS audio systems
-
Axxess GMOS-045 OnStar Interface for 2011 - 2016 Chevrolet Cruze$330.99Out of stock- For 2011 - 2016 Chevrolet Cruze vehicles
- Interface is designed to be used with factory non-amplified systems or factory amplified audio systems
- Retains R.A.P. (retained accessory power)
- Provides NAV outputs (parking brake, reverse, mute, and speed sense)
- Retains all factory warning chimes with built in speaker
Who Bought This Also Bought
My Wish List
Last Added Items
You have no items in your wish list.
Related Articles & Videos
How to install a car stereo
Watch our video and read our blog for step-by-step instructions documenting the installation of a aftermarket car stereo receiver.
QualityMobileVideo Blog
Car Stereo Wiring Guide
Watch our video and read our blog for the proper wiring colors and their definitions. We explain wire-by-wire what these connections do for the installation of an aftermarket car stereo receiver.
QualityMobileVideo Blog